HYDRAULIC TOOLS
DOA & STANLEY Hydraulic Tools
Stanley Hydraulic Tools
Breakers
Stanley BR67
The BR67 is a medium sized breaker in Stanley Hydraulic Tools line up of underwater paving breakers. The BR67 is in the 70 lbs class of breakers and is used for medium concrete and rock breaking, coral removal and rod driving.
The feathering on/off valve controls speed and allows easier initial tool placement. Standard 11⁄8″ x 6″ hex chuck and latch retainer. Painted hi-visibility yellow.
DOWNLOADS
FEATURES
- T-Handle with large on/off trigger for precise control
- Stainless Steel spool and fasteners
- Trouble free diaphragm accumulator provides additional blow energy and reduces recoil
- Feathering on/off valve allows easy initial tool bit placement
- Uses standard 11⁄8″ x 6″ hex shank tool bits
- Four tie rod design for durability
- Operates in any position
- Modular design for ease of service
- Latch retainer
SPECIFICATIONS
| TECHNICAL SPECIFICATIONS | Stanley BR67 | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Performance | 1300 bpm @ 8 gpm | |||||||||||||
| Steel Capacity | 1 1⁄8" x 6" Hex | |||||||||||||
| Handle Type | T-Handle | |||||||||||||
| Circuit Type | Open Center | |||||||||||||
| Flow Range | 7-9 gpm / 26-34 lpm | |||||||||||||
| Optimum Flow | 8 gpm / 30 lpm | |||||||||||||
| Working Pressure | 1500-2000 psi / 105‑140 bar | |||||||||||||
| Full Relief Setting | 2250 psi / 155 bar | |||||||||||||
| Weight (less tool bit) | 73 lbs / 33 kg | |||||||||||||
| Length | 29" / 73.6 cm | |||||||||||||
| Width (at handles) | 16" / 41 cm | |||||||||||||
| Hydraulic Ports | -8 SAE O-ring | |||||||||||||
| Couplers | No (See Accessories) | |||||||||||||
| Hose Whips | Yes (3/8" NPT Male thread) |
REFERENCES
| DESCRIPTION | PART NUMBERS | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HYDRAULIC BREAKERS/ UW CHIPPING HAMMERS STANLEY BR67 | ||||||||||||
| T Handle BREAKER 30kg - Hex 28x160mm 30L/min CE Underwater Parallel latch | ST-BR67320 |