HYDRAULIC TOOLS
DOA & STANLEY Hydraulic Tools
Stanley Hydraulic Tools
Hydraulic Pumps
Stanley SM50
The SM50 Submersible Pump is a self priming hydraulic dewatering pump with 3″ NPFT discharge. With 500 gpm (30,000 gph) of discharge flow, this pump is an excellent dewatering pump as well as a jetting pump. The cast stainless steel semi-closed impeller resist corrosion and the cast aluminum housing fits the need for high volume and high head pump applications. Can draw water down to 31/2″.
See chart below for gpm discharge at flow.
DOWNLOADS
FEATURES
- Stanley Hyrevz gear motor direct drive to impeller
- Stainless Steel impeller and fasteners
- Submersible and Self Priming
- Can run dry without damage
- 500 gpm (1890 lpm)
- 3″ discharge
- Cast-in lifting eye
- CE Certified
SPECIFICATIONS
| TECHNICAL SPECIFICATIONS | STANLEY SM50 | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity | 3" NPTF with 3" Camlock | |||||||||||||
| Performance | 500 gpm / 1890 lpm | |||||||||||||
| Flow Range | 7-12 gpm / 26-45 lpm | |||||||||||||
| Working Pressure | 1000-2000 psi / 70-140 bar | |||||||||||||
| Full Relief Setting | 2250 psi / 155 bar | |||||||||||||
| Weight | 22 1/2 lbs / 10 kg | |||||||||||||
| Length | 11 1/2" / 29.2 cm | |||||||||||||
| Width | 12" / 30.5 cm | |||||||||||||
| Hydraulic Ports | -8 SAE O-ring | |||||||||||||
| Connection | 3/8" Male Pipe Adapter | |||||||||||||
| Couplers | Yes | |||||||||||||
| Hose Whips | No |
REFERENCES
| DESCRIPTION | PART NUMBERS | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SUBMERSIBLES & TRASH PUMPS STANLEY SM50 | ||||||||||||
| Stainless steel impeller 26-45L/min CE - 3" NPTF discharge - equipped 3" Camlock Flow up to 1890L/min - Water head 21m" | ST-SM50100 |