NDT
NDT
Ultrasonic Thickness Gauges - Cygnus
Subsea Thickness Gauges
Cygnus DIVE
Ultrasonic Thickness Gauge
The Cygnus DIVE is a robust, wrist-mountable ultrasonic underwater thickness gauge – providing an invaluable free hand while performing Ultrasonic Thickness Measurement (UTM) underwater. The large, bright display with Live A-scan is easily viewable by both the diver and his camera – even in the poorest visibility. With only two buttons to press, the gauge is very easy to navigate through an intuitive, user-friendly menu.
OPTIONS AND ACCESSORIES
Topside Repeater (TSR) Remote Display Unit
The Cygnus Topside Repeater is a remote display unit connected to the DIVE gauge with an umbilical cable. It displays the thickness measurements at the surface in real-time during the survey.
Topside Repeater with Video Overlay
The Topside Repeater can also overlay the real-time thickness measurements on to a composite video signal, displaying it on the survey monitor screen. It will also then be recorded (if there is a video of the survey), showing exact locations and the thickness measurement for future reference.
HelmetView™ Display
This is a remote display with a fixing bracket for Kirby Morgan® Helmets that have an accessory mounting point. This is depth rated to 300m/984ft, and designed for use in situations with extremely poor visibility and ease of viewing by the diver.
FEATURES
- Multiple-Echo mode for accurate, through-coat measurements as specified by Classification Societies
- Single-Echo and Echo-Echo modes for heavily corroded metals with a thin or no coating
- Deep-Coat function to ignore coatings up to 20mm thick
- A-scan display to assist with measurement verification
- Optional Data Logging feature with AutoLog – storing up to 5000 measurements including A-scan data without pressing any button
- MSI™ (Measurement Stability Indicator) verifies stable, reliable readings
- Rechargeable lithium-ion battery giving up to 10 hours continuous measurement
- Optional remote display HelmetViewTM, Topside Repeater and CygLink surface display software
SPECIFICATIONS
| CYGNUS DIVE | ||
|---|---|---|
| Display | 2.8” quarter VGA colour LCD (320 x 240 pixels). Large clear thickness measurement (15mm high numbers), viewable from all angles. A-scan display with automatic X axis. Battery level, signal strength, probe type, velocity. Measurement mode and units indication | |
| Battery | Single 3.6V Li-ion 8.2 W battery. 10 hours continuous measurement Low battery warning ‘alert’ message | |
| Measuring Modes | Multiple-Echo using 3 echoes to ignore coatings up to 20mm thick. Echo-Echo using 2 echoes to ignore coatings up 1mm thick. Single-Echo using 1 echo | |
| Deep Coat | In Multiple-Echo mode, allows measurement to be made through thicker coatings of suitable materials of up to 20mm thick | |
| Accuracy | ±0.1 mm or 0.1% of thickness measurement, whichever is greatest, when calibrated in accordance with Cygnus Instruments calibration procedure | |
| Probe Options | Single crystal probes and Twin crystal probes | |
| Probe Cables | Double outer jacket in tough PU. Coloured yellow for easy locations underwater. Coiled for ease of use. Fischer S105 series connectors. | |
| Measurement Range in Steel | 1 - 250 mm (0.039 - 10 in.) depending on selected probe and configuration, material and temperature | |
| Measurement Resolution | Multiple-Echo with single crystal probes - 0.1 or 0.05 mm Single-Echo and Echo-Echo with twin crystal probes - 0.1 or 0.01 mm | |
| Measurement Units | mm or inches | |
| Probe Zero | Fully automatic probe zeroing for all probes types | |
| V-Path Correction | Automatic V-Path correction for all twin crystal probes | |
| Velocity Range | 2000 to 9000 m/s in 1 m/s steps | |
| Pulser | Twin channel 70 V spike pulser | |
| Receiver/Amplifier | 10 MHz bandwidth, 120 dB range, automatic TCG 60 MHz measurement time-base | |
| Data Logging (optional) | One-handed automatic logging of stable measurements. Capacity for up to 5000 points including 640 point A-scan data | |
| Data Output | RS-485 single pair, half duplex for surface connection | |
| Standards | Designed for EN 15317 | |
| Compliance | CE, UKCA, RoHS | |
| Warranty | 3 years on gauge and 6 months on probe |
REFERENCES
| DESCRIPTION | PART NUMBERS | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CYGNUS DIVE | ||||||||||||
| Cygnus DIVE Mk3 UTG Kit, without Probe | CY-001-7200/3 | |||||||||||
| Cygnus Data Logging DIVE Mk3 UTG Kit, without Probe | CY-001-7201/3 | |||||||||||
| Probe S2C Single Crystal 2.25MHz 13mm ½" for Cygnus DIVE UTG | CY-001-7230 | |||||||||||
| Probe S3C Single Crystal 3.5MHz 13mm ½" for Cygnus DIVE UTG | CY-001-7231 | |||||||||||
| Probe S5C Single Crystal 5MHz 13mm 1/2" for Cygnus DIVE UTG | CY-001-7232 | |||||||||||
| Probe S5A Single Crystal 5MHz 6mm (1/4") for Cygnus DIVE UTG | CY-001-7233 | |||||||||||
| Probe T5B Twin Crystal 5MHz 13/8mm for DIVE Mk2 UTG | CY-001-7235 | |||||||||||
| Probe T2C Twin Crystal 2MHz 17/12mm for Cygnus DIVE Mk2 UTG | CY-001-7236 | |||||||||||
| Topside Repeater (TSR) Kit for Cygnus DIVE UTG (Includes Umbilical Connectors - add cable) | CY-001-7221/4 | |||||||||||
| Topside Repeater (TSR) Kit with Video OSD for Cygnus DIVE | CY-001-7218/1 | |||||||||||
| Surface Computer Logging feature for Cygnus DIVE UTG | CY-001-7220 | |||||||||||
| Umbilical cable for DIVE / UW / ROV to Topside (per metre) | CY-001-0415 | |||||||||||
| HelmetView MK2 Remote Display Kit for Cygnus DIVE UTG | CY-001-7224/2 | |||||||||||
| Splitter Cable for Cygnus DIVE HelmetView & Surface Display | CY-001-7270 | |||||||||||
| CygLink Data Logging software upgrade for Cygnus DIVE | CY-001-7219/2 | |||||||||||
| Cygnus DIVE (Fischer) direct to computer (USB) Link Lead | CY-001-7271 | |||||||||||
| Umbilical (9-way D) to PC (USB) Link Lead for CygLink | CY-001-7262 | |||||||||||
| Umbilical (9-way D) to TSR Display Unit (Lemo) Link Lead | CY-001-0426 | |||||||||||
| Cygnus CygLink Topside Software on USB Flash Drive | CY-001-8212 | |||||||||||
| Video Cables and Adapters for Topside Repeater with OSD | CY-001-0442 | |||||||||||
| Cygnus DIVE (Fischer)-(9-way D) topside umbilical connectors | CY-001-7260 | |||||||||||
| Cygnus DIVE UTG Battery, uncharged (Watt Hour Rating: 8.1Wh) | CY-001-7250 | |||||||||||
| Battery Charger for Cygnus DIVE UTG (UK Mains Plug) | CY-001-7251-UK | |||||||||||
| Battery Charger for Cygnus DIVE UTG (EU Mains Plug) | CY-001-7251-EU | |||||||||||
| Battery Charger for Cygnus DIVE UTG (US Mains Plug) | CY-001-7251-US | |||||||||||
| Screen Protector for Cygnus DIVE UTG | CY-001-7263 | |||||||||||
| Replacement Lanyard for Cygnus DIVE/M5-UW UTG | CY-001-7257 | |||||||||||
| Operation Manual for Cygnus DIVE Mk2 UTG Printed A5 | CY-001-7256/2 |