NDT
NDT
Ultrasonic Thickness Gauges - Cygnus
ROV Gauges & Handlers
CYGNUS W1 PROBE HANDLER
Designed for Work Class ROVs, the Cygnus W1 probe handler is constructed from 316 stainless steel throughout and can be held by a manipulator arm by either a T bar or Fish Tail handle. Its double jointed coupling provides 15 degrees of movement in both planes guided by four pins – giving the optimal alignment. A shock absorbing spring reduces any impact. Any misalignment will be taken up by the coupling resulting in less movement of the manipulator arm position.
Probe Options
When ordering the S1 Probe Handler you must order the appropriate probe separately.
- S2C 2.25MHz Probe for M5 ROV P/N 001-8364
- S2C 2.25MHz Probe with nosecone for M4 ROV P/N 001-8317
SPECIFICATIONS
| CYGNUS W1 PROBE HANDLER | ||
|---|---|---|
| Size | 170 x 150 x 90mm (6.7 x 6 x 3.5 inch) (excluding handle) | |
| Weight in Air | 5kg (11 lbs) | |
| Depth Rating | 500 meters (1,640 ft) | |
| Material | 316 stainless steel | |
| Spring Force | 15 kg spring starts to compress | |
| Probe Types | 2.25 MHz 13mm with membrane (3.5 and 5 MHz at special request) | |
| Probe Cable | 5m double jacket coaxial (other lengths at special request) | |
| Warranty | 3 years / 6 months on probes |
REFERENCES
| DESCRIPTION | PART NUMBERS | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CYGNUS PROBES | ||||||||||||
| Cygnus W1 Work Class ROV PROBE HANDLER, less Probe & Handle | CY-001-8311 |