NDT

NDT

Cathodic Protection - Buckleys

Buckleys
UCP Probes for ROVs

UCP1A Contact Probe

The UCP1A contact probe is a lightweight and versatile instrument that provides a means of carrying out underwater cathodic protection potential measurements.

It has been specially designed for use with manned or Remotely Operated Vehicles (ROVs) and comes complete with differing lengths of underwater cable. Each probe is

supplied with a Certificate of Inspection and Conformity.

When the stainless-steel probe tip of the UCP1A makes contact with the surface under test, the resulting voltage can be read on a suitable high impedance or digital voltmeter.

The UCP1A is extensively used in a wide range of applications including production and drilling platforms, ships’ hulls, jetties, and other marine works.

FEATURES
  • Hard-wearing
  • DELRIN body
  • Stainless steel probe tip
  • Lightweight design
  • Easy to use
  • Suitable for gripping in manipulator arm
UCP1A CONTACT CP PROBE
HALF CELL
TypeSilver/silver chloride screw-in
Output≈ +250mV VS SHE
Temperature coeff-0.6mV per °C
Temperature range0 - 30 °C
Working life1 to 2 years
UNIT
DesignFor use with remote voltmeter
Minimum load impedance> 10M Ohms
ProbeStainless Steel (316) replaceable (our ref: H14)
Weight0.5Kg
Size126mm x 39mm diameter
Underwater cable3/50/100/200/300 m long x 9mm
Packed weight (complete)0.8kg
Dimensions (packed)26cm x 14cm x 30cm
This item is not depth rated as there are no pressure sensitive components within the assembly.
Note: Due to ongoing technical developments, all stated information is typical and is subject to change without notice or obligation.
DESCRIPTIONPART NUMBERS
UCP1A contact CP probe 3mBC-6004-0039
UCP1A contact CP probe 50mBC-6004-0098
UCP1A contact CP probe 100mBC-6004-0099
UCP1A contact CP probe 200mBC-6004-0100
UCP1A contact CP probe 300mBC-6004-0101
UCP1A contact CP probe with calibration kitBC-6004-0055