NDT

NDT

Cathodic Protection - Buckleys

Buckleys
UCP Probes for ROVs

UCP1B Proximity Probe

The UCP1B proximity probe is a lightweight and versatile instrument specifically designed to carry out underwater cathodic protection potential measurements.

The probe has been developed for use with manned or Remotely Operated Vehicles (ROVs) and comes complete with 100 metres of cable. Each probe is supplied with a Certificate of Inspection and Conformity. By placing the UCP1B in close proximity to the surface under test, a voltage reading can be obtained on a suitable high impedance or digital voltmeter. The meter should be connected between the probe and a separate structure negative return.

The UCP1B is extensively used in a wide range of applications including production and drilling platforms, ships’ hulls, jetties and other marine works.

FEATURES
  • Hard wearing DELRIN body
  • Half Cell can be replaced
  • Lightweight design
  • Easy to use
  • Suitable for fitting to manipulator arm
UCP1A CONTACT CP PROBE
HALF CELL
TypeSilver/silver chloride screw-in
Output≈ +250mV VS SHE
Temperature coeff-0.6mV per °C
Temperature range0 - 30 °C
Working life1 to 2 years
UNIT
DesignFor use with remote voltmeter
Minimum load impedance> 10M Ohms
ProbeStainless Steel (316) replaceable (our ref: H14)
Weight0.5Kg
Size126mm x 39mm diameter
Underwater cable3m long x 9mm
Packed weight (complete)0.8kg
Dimensions (packed)26cm x 14cm x 30cm
This item is not depth rated as there are no pressure sensitive components within the assembly.
Note: Due to ongoing technical developments, all stated information is typical and is subject to change without notice or obligation.
DESCRIPTIONPART NUMBERS
UCP1B proximity CP probe 3m, with Brackish water cellBC-6004-0117
UCP1B proximity CP probe 3mBC-6004-0043
UCP1B proximity CP probe 50mBC-6004-0102
UCP1B proximity CP probe 100mBC-6004-0103
UCP1B proximity CP probe 200mBC-6004-0104
UCP1B proximity CP probe 300mBC-6004-0105
UCP1B contact CP probe with calibration kitBC-6004-0056