NDT

NDT

Cathodic Protection - Buckleys

Buckleys
Reference Cells

Plastic-bodied K-SAT reference electrode

The latest screw-in K-SAT Reference Cell is an improved version of the original K-Series reference cell. It offers greater stability and a longer service life.

This K-SAT reference cell is used to verify the potential of the Silver/Silver Chloride/ Seawater (Ag/AgCl/seawater) half-cell in a BathyCorrometer®, UCP1A or UCP1B underwater probe.

It has been specifically designed to be used on the BathyCorrometer®. This is achieved by removing the stainless-steel probe tip and screwing on the K-SAT reference cell.

The potential of the internal Ag/AgCl/seawater reference cell can then be checked. To be confident in the results, ideally a set of three, different, K-SAT Cells should be used.

The cells can also be used for checking the UCP1A or UCP1B probes but an adaptor lead (6004-0018) and a high impedance voltmeter (greater than 10 M Ohm) would also be required.

The electrode is housed in a high resistance PVC body. The reference electrode is supplied with full operating instructions and will give a service life of up to 1 year if correctly maintained and used.

1-Célula-de-Referencia-K-SAT
FEATURES
  • Robust and easy to use
  • Suitable for use with BathyCorrometers®, UCP1A and UCP1B probes
  • Environmentally friendly vs calomel electrodes
  • Inert body casing: PVC
  • Long service life
  • RoHS compliant
K-SAT REFERENCE CELL
Electrical connectionscrew fit
Output+196mV @ 25°C vs SHE
Accuracy±10mV @ 25°C vs SHE
Temperature coeff-0.64mV per/°C
Temperature range0 - 40 °C
Working lifeup to 1 year
Weight (cell)70g
Dimensions (cell)155mm long x 25mm diam.
Packed weight0.3Kg
Dimensions (packed)26cm x 14cm x 30cm
Note: Due to ongoing technical developments, all stated information is typical and is subject to change without notice or obligation.
DESCRIPTIONPART NUMBERS
Plastic-bodied K-SAT reference electrodeBC-6004-0111
Plastic-bodied K-SAT reference electrode