NDT
NDT
Ultrasonic Thickness Gauges - Cygnus
ROV Gauges & Handlers
Cygnus MiniROV
Ultrasonic Thickness Gauge
The Cygnus Mini ROV Mountable thickness gauge has been specially designed to be mounted onto small observation ROVs with or without a manipulator facility. Built in conjunction with VideoRay, this subsea thickness gauge will allow the operator to carry out an ultrasonic thickness measurement in areas that have previously been unfeasible using larger ROVs or divers. And no need to remove coatings!
OPTIONS AND ACCESSORIES
Engineered Probe Handling Solutions
Complementing the Cygnus Mini ROV Mountable thickness gauge, the Cygnus G1 is designed for use on observation, inspection and light workclass ROVs whilst the S1 probe handler is developed for use on ROVs performing UTM surveys on ship hulls.
Topside Repeater Remote Display Unit
The Cygnus Topside Repeater is a remote display unit connected to the gauge with an umbilical cable. It displays the thickness measurements at the surface in real-time during the survey.
Topside Repeater with Video Overlay
The Topside Repeater can also overlay the real-time thickness measurements on to a composite video signal, displaying it on the survey monitor screen. It will also then be recorded (if there is a video of the survey), showing exact locations and the thickness measurement for future reference.
FEATURES
- Multiple-Echo mode for accurate, through-coat measurements as specified by Classification Societies
- Supplied with CygLink software to display and process measurements on a computer at the surface
- Easy calibration at the surface via CygLink software or Topside Repeater (TSR) unit
- Optional Topside Repeater (TSR) unit allowing readings to be displayed remotely and superimposed onto ROV’s camera screen
- Optional purpose-built ROV probe handlers for optimal alignment
SPECIFICATIONS
| CYGNUS MiniROV | ||
|---|---|---|
| Materials | Velocities between 1000 m/s and 9995 m/s (0.0400 and 0.3998 in/microsec) | |
| Measurement Range in Steel | 1mm - 250mm (0.040” - 10.000”) depending on selected probe and configuration, material and temperature | |
| Accuracy | ±0.1mm (±0.004”) or 0.1% of thickness measurement, whichever is greatest, when calibrated in accordance with Cygnus Instruments calibration procedure | |
| Resolution | 0.1 mm or 0.05 mm (selectable) (0.005” or 0.002”) | |
| Probe Options | Single crystal probes | |
| Power | 7.5 - 30 V DC @ 150 mA (max) | |
| Display | PC or laptop with VGA (not included) | |
| Size | 160mm x 62mm (6.3 x 2.4 in.) | |
| Weight in Air | 550g (19.4 oz) | |
| Operating Temp. | -10°C to +50°C (14°F to 122°F) | |
| Approvals | RINA Type approved | |
| Testing | Tested to 500m (1,640ft) depth | |
| Communication | RS-422, Simplex Single Pair or 2400 Baud (RS-232 9600 Baud output available as special order) | |
| Standards | Designed for EN 15317 | |
| Compliance | CE, UKCA, RoHS | |
| Warranty | 3 years on gauge and 6 months on probe |
REFERENCES
| DESCRIPTION | PART NUMBERS | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CYGNUS MiniROV MOUNTABLE | ||||||||||||
| Cygnus MINI ROV 500m Mk4 UTG Kit without Probe | CY-001-9944/4 | |||||||||||
| Probe S2C 2.25MHz 13mm (1/2") 1m cable for Cygnus Underwater/MINI ROV | CY-001-9340 | |||||||||||
| G1 Inspection ROV PROBE HANDLER without Probe | CY-001-8351 | |||||||||||
| Probe S2C 2.25MHz 13mm (½") for G1 & MINI ROV UTG (1m cable) | CY-001-8354 | |||||||||||
| Cygnus S1 Hull Inspection ROV PROBE HANDLER, without Probe | CY-001-8331 | |||||||||||
| Probe S2C 2.25MHz 13mm (½") for S1 & MINI ROV UTG (1m cable) | CY-001-8334 | |||||||||||
| Topside Repeater Kit with Video OSD for Cygnus MINI ROV UTG | CY-001-7153/4 | |||||||||||
| Videoray Mounting Kit incl. brackets, fittings, cable | CY-001-8309 | |||||||||||
| O Ring Pack for Cygnus MINI/1000m /3000m ROV Mountable UTG | CY-001-3712 | |||||||||||
| RS232 to USB Serial Interface Cable (KK Systems) | CY-003-0422 | |||||||||||
| Isolated Data Converter RS422 to RS232 Model K3 | CY-001-8308 | |||||||||||
| CygLink Software & manual on USB for MINI ROV UTG | CY-001-8333 | |||||||||||
| Impulse Connector 4-Way Blanking Plug IE-LPMDC-4-MP | CY-001-0419 | |||||||||||
| Impulse Connector 4-Way with Flying Lead LPMIL-4-MP | CY-001-0418 | |||||||||||
| Test Cable - Impulse to 9 way 'D' Connector with DC Power | CY-001-0432 | |||||||||||
| Video Cables and Adapters for Topside Repeater with OSD | CY-001-0442 | |||||||||||
| Umbilical cable for DIVE / UW / ROV to Topside (per metre) | CY-001-0415 | |||||||||||
| Mini M4 ROV test cable parts (4 way connector for signal and power) - Umbilical cable to be ordered separately | CY-001-7154 |