NDT

NDT

Ultrasonic Thickness Gauges -Cygnus

Cygnus
Surface Thickness Gauges

Cygnus 4+ General Pursose

Ultrasonic Thickness Gauge

The Cygnus 4+ General Purpose thickness gauge is a light, tough multi-mode thickness gauge. It features a sunlight readable display with Live A-scan, intuitive menu and sequential data logging for easy reporting and analysis. Used with Cygnus High Temperature Probe, the Cygnus 4+ can measure remaining wall thickness of high-temperature, in-service assets without shutdown or isolation.

Basic Data Logging

  • Linear based data logging
  • Eight user-defined comments to attach to any measurement point
  • Auto-log feature
  • Saves measurements and A-scans
  • Records stored on SD card
  • CygLink software used to transfer and manage data
FEATURES
  • Multiple-Echo mode for accurate, through-coat measurements as specified by Classification Societies
  • Echo-Echo and Single-Echo modes for heavily corroded metals with a thin or no coating
  • Deep Coat function ignores coatings up to 20mm thick
  • Manual and automatic gain control
  • Min/max measurement limit functions with visual and vibrate alert
  • Large front sunlight readable LCD display with Live A-scan
  • Water and dust tight IP67 housing
  • Shock and impact proof to US MIL STD 810G
  • Safe operation in explosive atmospheres: Class 1, Division 2, Group D locations only, as defined in NFPA 70, Article 500
  • One and two point calibration
  • Can be upgraded to 6+ at an additional cost
CYGNUS 4+ GENERAL PURPOSE
Measuring ModeMultiple-Echo using 3 echoes to ignore coatings up to 20 mm thick
Echo-Echo using 2 echoes to ignore coatings up to 1mm thick
Single-Echo using 1 echo
MaterialsVelocities from 1,000 - 9,000 m/s (0.0390 - 0.3543 in/us)
Accuracy±0.05 mm (±0.002”) - in Multiple-Echo measurement mode, when calibrated and
measuring the same material as calibrated on.
±0.1 mm (±0.004”) or 0.1% of thickness measurement whichever is the greatest - in
Single-Echo & Echo-Echo measurement modes, when calibrated and measuring the
same material as calibrated on.
ResolutionMultiple-Echo mode - 0.1 mm (0.005”) or 0.05 mm (0.002”)
Single-Echo and Echo-Echo modes - 0.1 mm (0.005”) or 0.01 mm (0.001”)
Probe OptionsSingle Crystal probes, Twin Crystal probes and High Temp probe
Measurement Range in Steel0.8 – 250mm (0.031 in. – 10 in.) depending on selected probe and configuration, material and temperature
Connector2 x Lemo 00
Power3 x AA batteries
Battery LifeApprox. 10 hours continuous measurement
ElectronicsDual channel pulser
Display2.4” QVGA LCD, 47 mm (W) x 37 mm (H)
Size84mm x 130mm x 35mm (W x H x D) (3.3” x 5.1” x 1.4”)
Weight300g (10.5 oz.) (inc. batteries)
Operating Temp.-10°C to 50°C (14°F - 122°F)
Data Logging5000 measurements and A-scans per record. Max number records: 100
Computer SoftwareCygLink allows remote logging and viewing of A-scan graphs
Survey and report generation to PDF file
Graphic analysis of data and statistical calculations
Environmental RatingIP67
Safe operation in Explosive Atmospheres: Class I, Division 2, Group D Locations only, as defined in the National Fire Protection Association Code (NFPA 70), Article 500.
Tested using MIL-STD-810G, Method 511.5, Procedure I
MIL STD 810G Method 501.6 (high temp +55°C (131°F))
MIL STD 810G Method 502.6 (low temp -20°C (-4°F))
MIL STD 810G Method 507.6 (humidity 95%)
MIL STD 810G Method 512.6 (immersion - 1 metre for 30 mins)
Shock and ImpactMIL STD 810G Method 514.7 (vibration - 1 hour each axis)
MIL STD 810G Method 516.7 (shock 20g - 11ms half sine shock pulse, 40g 11ms in each axis)
MIL STD 810G Method 516.7 (26 drops - transit drop 1.22 m)
StandardsDesigned for EN 15317
ComplianceCE, UKCA, RoHS
Warranty3 years on gauge and 6 months on probe
DESCRIPTIONPART NUMBERS
CYGNUS 4+ GENERAL PURPOSE
Cygnus 4+ GENERAL PURPOSE Mk5 UTG Kit, without ProbeCY-050-4500/5
Firmware upgrade from Cygnus 4+ to Cygnus 6+CY-050-6601
Cygnus 4+ Mk5 software upgrade - added logging functionsCY-050-4520
Probe S2C Single 2.25MHz 13mm with BNC connectorCY-004-9500
Probe S3C Single 3.5MHz 13mm with BNC connectorCY-004-9504
Probe S5C Single 5MHz 13mm with BNC connectorCY-004-9508
Probe Lead Twin Lemo 00 to BNC 1.35m (4'6")CY-004-0410
Probe S5A Single 5MHz 6mm with Single Lemo 00 connectorCY-004-9507
Probe Lead Twin Lemo 00 to Single Lemo 00 1.4m (4'6")CY-004-0412
Probe T2C Twin 2MHz 17/12mm with Twin Lemo 00 ConnectorCY-004-9550
Probe T5B Twin 5MHz 13/8mm with Twin Lemo 00CY-004-9558
Probe Lead Twin Lemo 00 to Twin Lemo 00 1.35m (4'6")CY-004-0411
Probe T5B-CSW 5MHz 13/8mm Side Exit Cable to Twin Lemo00CY-004-9590
Probe T5A Twin 5MHz 9.5/6.5mm Side Exit Cable to Twin Lemo 00CY-004-9560
Probe T7A-CSWB Twin 7.5MHz 6.5/4.5mm Side Exit Cable to Twin Lemo00CY-004-9591
PROBE T5B-MAUH 5MHz Twin elementCY-004-9561
Probe Lead Twin Lemo 00 to Microdot for T5B-MAUHCY-004-0418
Probe Lead Twin Lemo 00 to Microdot S/S BraidCY-004-0417
COUPLANT High Temperature (-45C° to 455°C) 4oz/118 mlCY-001-3735
Test Block Steel 4 Step Metric 2.5 - 20mm 2.5/5/10/20CY-001-4858
Test Block Steel 4 Step Imperial 0.1 - 0.75 inchCY-001-4859
Marinised Probe S2C 2.25MHz 13mmCY-002-9387
Marinised cable for use underwater priced per metreCY-001-0434
Twin Lemo 00 to Single Lemo 1 adapter for C2+/C4+/C6+Mk5 UTGCY-050-0106
Mini USB cable for data transferCY-050-0120
Neck Strap with fixings for C2 / 2+ / 4 / 4+ / 6+ Mk5 UTGCY-050-0115
Hand Strap with fixing for C2 / 2+ / 4 / 4+ / 6+ Mk5 UTGCY-050-0110
Belt Clip with fixing for C2 / 2+ / 4 / 4+ / 6+ Mk5 UTGCY-050-0100
Peli Carry Case for Cygnus 4+ Mk5 Gauge KitCY-050-4511/5