CCTV & Lighting

CCTV & Lighting

Lighting

MVF-6 Underwater Lighting System

Fixed underwater illumination system based on latest Led Cob technology.
Do not require ant maintenance and can be installed underwater for long periods.

Overview
The system consists of one 220VAC 50/60 Hz surface unit and two, three or four floodlights.

Each floodlight is connected to the surface unit via 50m of rugged PUR cable.

Surface unit
Installed in a rugged wheeled IP67 Peli case that also allows storage of the floodlights.

The surface unit can be powered by a standard 220VAC / 16A output.

Floodlights
Based on latest Led Cob technology allows permanent installation in any position, or hanging from its own cable.

Each Floodlight is equipped with three parallel Led Cobs for a total luminosity of approx. 18.000 lux The Led Cobs compile with IEC/EN62031:2008 and 62471:2006, general specific normative.

Cable
Purpose manufactured multi lead with a rugged PUR coating that meets any relevant standards and resistant to most chemical products.

Connections
Industry standard Sub Conn and Bulgin connectors.

DOWNLOADS
MVF-6 UNDERWATER LIGHTING SYSTEM
SURFACE UNIT
Power:220VAC/
Consume:6A
Weight:25kg
Dimensions:650x350x500mm
Outgoing connectors: Bulgin Bucaneer 3pin female chassi
CABLE
Leads:6 x 1.5mm2
External coating:PUR yellow
Weight:280g/m
Underwater connector:SubConn LPIL3F
Surface connection:Bulgin buccaneer 3pin male
FLOODLIGHT
Power: 30VDC/ 1.3A per Led Cob
Flux @ 25C:125lum/W , approx.: 18.000 lux
CRI:90
Weight surface:2.200 g
Weight water:1.900 g
Dimensions:290x120x45mm
Max depth msw:150m
GENERAL
Working temperature:40ºC to -40ºC
DESCRIPTIONPART NUMBERS
MVF-6 Underwater Lighting SystemMV-MVF-6