DRYSUITS
Drysuits
Trajes Secos
PU Drysuits Viking™
Viking™ HAZTECH
The Viking HAZTECH is a lightweight robust suit for diving in hazardous water conditions, particularly where there may be a danger of heat exhaustion in warm water or hot climatic conditions.
FABRIC
TPU (thermoplastic polyurethane) outer layer in red or black, single coated onto a black knitted nylon fabric.
Average material weight is approx. 480 ± 40 g/m2
SEAMS
High frequency welded seams for maximum strength and safety. Heat applied internal seam tape.
REINFORCEMENTS
Black welded reinforcements applied to the shoulder area and elbows. Embossed knee pads welded above and below the knees.
VALVES
The standard configuration includes the following valves mounted on canvas reinforcement discs:
- Push-protected inflation valve, positioned in the center of the chest strap.
- Hose: CEJN connector, 80 cm long.
- Viking X2 bleed valve on the left arm.
FOOTWEAR
Equipped with 5 mm canvas-lined neoprene boots as standard. Other boot options are available.
STANDARDS
- EN 14225-2:2017
- Hazmat (HZ) approval
- BIO micro-organism approval
FEATURES
- Lightweight and robust material
- Ideal for warm water & warm climates
- Helps alleviate the issue of heat stress
- Suitable for cold water diving
- Suitable for contaminated water diving operations
- High Frequency welded seams for additional strength and safety.
- Smooth, easy to clean surface after diving in contaminated waters
- Tested for flex cracking after > 200 flexes down to -40°C
- Hazmat (chemical protection) and BIO (protection against infective agents) approvals
SPECIFICATIONS
| SPECS | VIKING™ HAZTECH | |||
|---|---|---|---|---|
| Product material | Polyurethane (TPU) on Polyamide knitted fabric | |||
| Colour available | Red or black | |||
| Material weight (nominal) | 550 g/m2 | |||
| Property | Result | Test Method | ||
| Tear resistance, warp / weft | > 70 N / >65 N | ISO 4674-1 | ||
| Tensile strength, warp / weft | >600N/50 mm - >350N/50 mm | ISO 13934-1 | ||
| Puncture resistance | >40 N | EN 863 | ||
REFERENCES
| DESCRIPTION | PART NUMBERS | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Polyurethane (TPU) DRYSUIT | ||||||||||||||||
| Viking HAZTECH (demand), red/black, STANDARD | V-2211080000 | |||||||||||||||
| Viking HAZTECH (demand), black/black, STANDARD | V-2211070000 | |||||||||||||||
| Viking HAZTECH (freeflow), red/black, STANDARD | V-2211080000 | |||||||||||||||
| Viking HAZTECH (freeflow), black/black, STANDARD | V-2211070000 |