HYDRAULIC TOOLS

STANLEY Hydraulic Tools

Stanley
Drills

Stanley DL07

The Stanley DL07 hydraulic drill is a forward/reverse, variable speed drill with a ½” keyed chuck for underwater drilling applications. The DL07 has more than enough torque to drill most steel, masonry, wood or coral. A two position assist handle and trigger guard are standard. See chart below for speeds at select gpm of hydraulic flow. Painted hi-visibility yellow.

DOWNLOADS
  • Integral Stanley Hyrevz gear motor produces high torque
  • Stainless Steel spools and fasteners
  • Forward-Reverse with variable speed
  • Dual position assist handle provides increased control
  • Oversized trigger with guard for operator comfort
  • Wiper seals on reversing and trigger spool
  • Built in reverse check valve ensures long seal life
  • Plastisol handle for comfortable ergonomic grip
  • Forward position of handle provides better balance
  • Open Center/Closed Center-Dual Spool Feature
  • Cast-in lifting eye
TECHNICAL SPECIFICATIONSSTANLEY DL07
Chuck CapacityUp to 2" diameter or 4" core bit
Steel Capacity736 Skil hex
Circuit TypeOpen Center
Flow Range7-9 gpm / 26-34 lpm
Optimum Flow8 gpm / 30 lpm
Working Pressure1500-2000 psi / 105-140 bar
Full Relief Setting2250 psi / 155 bar
Rotation Speed0 - 300 rpm
Weight (less tool bit)49 lbs / 22.2 kg
Length24 ½" / 62.2 cm
Width (at handles)14" / 35 cm
Hydraulic Ports-8 SAE O-ring
CouplersVaries with model (See ordering information)
Hose WhipsYes (3⁄8" NPT Male thread)
DL07 SPEED/HYDRAULIC FLOW
350 rpm @ 3 gpm / 11.3 lpm
475 rpm @ 4 gpm / 15 lpm
750 rpm @ 6 gpm / 23 lpm
1000 rpm @ 8 gpm / 30 lpm
1250 rpm @ 10 gpm / 38 lpm
DL07 TORQUE at PSI/Bar
4 ft lbs @ 500 psi0.5 Nm @ 35 bar
9 ft lbs @ 1000 psi1.2 Nm @ 70 bar
14 ft lbs @ 1500 psi1.9 Nm @ 105 bar
19 ft lbs @ 2000 psi2.6 Nm @ 140 bar
DESCRIPTIONPART NUMBERS
DRILLS & HAMMER DRILLS STANLEY DL07
Drill, Underwater, 1⁄2" Capacity, Assist Handle, less couplersST-DL07652