COMMUNICATIONS

Communications
AMRON

Two Diver Communications

Amron 2825R-01

Amron 2825R-01 Two Diver Rack Mount Communicator.

The AMCOM™ II 2825R-01 Two-Diver Rack Mount Communicator features separate channels and volume controls for each diver and the tender so that uplink and downlink paths can be customized for varying equipment configurations and individual comfort levels.

The newest version of the AMCOM™ II Rack Mount Communicator has the same versatile user-interface and great sound quality as its predecessor with several new digital enhancements: (1) High-Audio Fidelity; (2) Extended Battery Operation; (3) Flexible Gain Settings; (4) Ultra-Low Electromagnetic Interference (EMI); and (5) Audio In/Out Connections.  The Specs tab outlines the many outstanding features that continue to make this model the most popular and powerful communicator on the market today.

ENHANCEMENTS

  • High Audio Fidelity

Ultra-low noise, wide band width amplifier circuit combined with noise suppression circuitry produces crystal clear speech. The amplifier’s Automatic Gain Control (AGC) circuit prevents audio signal distortion and enhances speaker protection and audio quality.

  • Extended Battery Operation Time

The audio amplifier card deploys a state-of-the-art, Class-D digital audio power amplifier. It has very low power dissipation, generates minimal heat, and enhances battery life.

  • Ultra-Low Electromagnetic Interference (EMI)

EMI is minimized through spread-spectrum and de-phase control techniques providing for optimum integration with diving systems.

  • Audio In/Out Connections

Audio IN and audio OUT RCA connections are provided for receiving and sending standard audio line-level signals to and from another device. Two rack mount communicators can be interconnected for redundancy requirements or can double the number of users as needed.

FEATURES
  • Separate channels and volume controls for each diver and tender to accommodate individual earphone and microphone adjustments, equipment variations and individual comfort levels.
  • Divers’ umbilicals can be set up on 4-wire mode (full duplex) or 2-wire mode (push-to-talk) or any combination of the two modes for each diver.
  • Communicator comes standard with rear mounted MS connector, providing connections to diver and tender inputs and outputs.
  • Ability to use both dynamic and pre-amplified diver microphones with a unique circuit that detects microphone type and automatically adjusts volume levels.
  • Weatherproof push-to-talk microphone for better voice intelligibility topside. See below for other recommended equipment.
  • Battery Condition Indicator – Visual LED indicator of battery condition.
  • Internal charging system with battery back-up allows for simultaneous charging and operation of the unit while protecting the rechargeable battery from being overcharged. Back-up battery automatically supplies power to the audio amplifier when AC power is disconnected to allow for continued operation up to 45 hours.
AMRON 2825R-01
Input Impedance (Each Input): 250 Ω
Frequency Response:300 - 10000 Hz
Common Mode Rejection:40 dB minimum
Current Drain Maximum Full Volume: 3 amps
Minimum Quiescent:0.190 amps
Output Impedance: 4 Ω
Power Supply Voltage:12 VDC nominal (9 VDC min - 16 VDC max)
AC Power Operating Range:90-264 VAC, 50-60 Hz
Sensitivity (Input):0.5 mV
Output Power (RMS @ 4 Ohm Load, 12 VDC): 10 watts audio
Rear Connector Input/Output:20 Pin Female MS
Enclosure: 19 in. rack, aluminum, black anodized
Back-Up Battery:1 ea. 12 VDC rechargeable battery
Battery Life:45 hours
Height: 7 in. (17.8 cm)
Width: 19 in. (48.3 cm)
Depth:13 in. (33.0 cm)
Weight:19.5 lb. (98.8 kg)
DESCRIPTIONPART NUMBERS
Amron Two Diver Rack Mount CommunicatorAM-2825R-01