ROVs/Mini ROVs

SAAB
VIDEORAY

ROVs

SAAB - Manipulators

HLK-2010 Manipulator Jaw Rotate

The HLK-2010 is a light duty jaw rotate unit designed specifically for the EH5 manipulator, but can be retrofitted for any application requiring a jaw rotate function.

All hydraulic connections are ported into the rear of the body and are available in 1/8″ NPTF in accordance with ANSI 81.20.3.

The rotate is a rack and pinion design while the jaw function is a double acting actuator. The body and bracket are manufactured of 6082 aluminium with a 50 micron hard anodized surface.

FEATURES
  • Constructed from corrosion resistant materials
  • Compact & lightweight @ only 3.24kg (7.14lb) in water
  • Rotate range of 180 degrees and a jaw opening of 154mm at the end of the jaw tines
HLK-2010 Manipulator
GENERAL
Function Jaw & Wrist Rotate
Materials 316 Stainless Steel, 6082 Aluminium
Product Finish Hard Anodised
Seal Material Nitrile/NBR/Buna-N, PTFE
Ports 1/4" NPTF (ANSI 81.20.3)
Dimensions (L) 295mm x (W) 116mm x (D) 75mm (11.6" x 4.56" x 3")
Weight in Air 4.13kg (9.1lbs)
Weight in Water 3.24kg (7.14lbs)
Wrist Travel 180 Degrees
Jaw Opening 154mm (6")
T-Handle Groove Diameter12.7mm (1/2")
HYDRAULIC PERFORMANCES
Max. Working Pressure 140bar (2000psi)
Flow 0.5lpm to 6lpm (0.13gpm to 1.32gpm)
Fluid Type Mineral: DIN 51524, ISO 11158, ISO 6743-4, ASTM D6158 Synthetic: Panolin Atlantis, HLP-Synth
Viscosity 16cSt to 220cSt. VG 22-32 Recommended
Fluid Temperature 5-60°C (41-140°F)
Cleanliness Requirements ISO 4406:19/17/14, NAS 1638:8, AS4059:9A/8B/8C
FORCES
Wrist Torque 18.7Nm @ 140bar (13.8lbf.ft @ 2000psi)
Jaw force 630N @ 140bar (141.63lbf @ 2000psi)
Soft Rope Cutting Diameter 19mm (3/4")
ENVIRONMENTAL
Operational Depth 6000msw (19,680ft)
Operating Temperature 5-60°C (41-140°F)
Storage Temperature 0-70°C (32-158°F)
Humidity 0% to 100% Condensing
DESCRIPTIONPART NUMBERS
HYDRO-LEK - Manipulator Jaw Rotate HLK-2010SE-HLK-2010
HLK-2010